1. Autoclavable Laboratory Fermentor
2. High Performance in-situ Sterilizable Laboratory Fermentor


1. AUTOCLAVABLE LABORATORY FERMENTOR

• Single wall glass with Stainless Steel end caps
• Non - welded head plate construction § Cartridge heater &water circulation loop for effective temperature control § Capacityrange : 31 and 51, Interchangeable shell with same head plates
• Easy to remove - self aligning motor
• Motor drive with Tacho feed back for DC Motors
• Twin, tri & quad versions are available
• Ergonomically designed for easy operation and servicing
• Flexibility of various control combinations & custom design
• Complete unit with standard utilities
• Superior design for optimal heat & mass transfer for high cell density
• Dip Sampling facility § Gas mixing units

Autoclavable Fermenter Specifications:

Vessel	Total Capacity	3	5
	Working Maximum (L)	2	3
	MCC	Glass & Stainless Steel
Controller		LA1 - Independent Controllers
		LA2 - PLC
Temperature	Range	Fermentation : From 50C above coolant temperature to 500C
	Sensor	Platinum RTD
Agitation	Drive	DC Motor - Easily
removable - Top drive
	Range	100-1000 rpm
	Control	DC Drive
	Impellers	Four / Six blade Rushton turbine impellers. Other impellers optional
	Indication	Digital Display
Aeration	Air Flow	Standard Rotameter.
Thermal Mass Flow Meter /
Controller is offered as option
	Inlet / Exhaust Filter	0.2 micron autoclavable
PTFE (Disposable)
	Condenser	Exhaust condenser - Glass to
minimize evaporation
	Gas Mixing Unit	Optional
pH	Range	0 - 14
	Probe	Gel Filled probes
	Control	Through peristaltic pumps.
Dissolved Oxygen	Range	0-100%
	Probe	Polorographic
	Control Mode	Control through air flow or speed or
cascade in LA2 models
ANTIFOAM	Control	Level Switch and Peristatic Pump
Electrical Data	Power Basic (KVA)	0.5	0.5
Continuous Culture		Optional
Software		OPC server

2.HIGH PERFORMANCE IN - SITU STERILISABLE LABORATORY FERMENTOR:

This range of innovatively designed fermenter is suitable for cultivation of microbial, recombinant, and other cell culture systems in Pharma and Biotech Research Labs.

Salient Features:

• Ergonomically designed for easy operation and servicing.
• Flexibility of various control combinations & custom design.
• Complete unit with standard utilities.
• Superior design for optimal heat & mass transfer for high cell density.
• Dip sampling facility.
• Gas mixing units
• Jacketed Stainless Steel Vessel with fine internal surface finish.
• Sight glass for viewing maximum and minimum working volume.
• Powerful illumination for clear view of the contents.
• Capacity Range : 3liters,5 liters, 7 liters, 10 liters and 14 liters.
• Provision for Hot / Chilled Water circulation for temperature maintenance.
• Twin, Tri & Quad versions are available .

In-situ Sterilisable Laboratory Fermenter Specifications:

Vessel	Total Capacity	3	5	7	10	14
	Working Maximum (L)	2	3	5	7	10
	MCC	Stainless Steel
Controller		LS1 - Independent Controllers
		LS2 - PLC
TEMPERATURE	Range	Fermentation: From 50C above coolant temp. to 600C
	Sensor	Platinum RTD
AGITATION	Drive	AC Motor with mechanical seal, easily
removable - Top drive
	Range	100-1500 rpm
	Control	Inverter based speed controller
	Impellers	Four / Six blade Rushton turbine impellers.
Other impellers optional
	Indication	Digital Display
AERATION	Air Flow	Standard Rotameter.
Thermal Mass Flow Meter /
Controller is offered as option
	Inlet / Exhaust Filter	0.2 micron autoclavable PTFE filter cartridge
with stainless steel housing
	Condenser	Exhaust condenser to minimize evaporation
	Gas Mixing Unit	Optional
pH	Range	0 - 14
	Probe	Gel Filled probes
	Control	Th rough Peristaltic pumps.
DISSOLVED OXYGEN	Range	0-100%
	Probe	Polorographic
	Control Mode	Control through air flow or speed or
cascade in LS2 models
ANTIFOAM	Control	Level Switch and Peristatic Pump
ELECTRICAL DATA	Power Basic (KVA)	0.8	1.1	1.2
CONTINUOUS CULTURE		Optional
SOFTWARE		OPC server or SCADA package