Lyophilizer for industries is a complete automated SCADA system using an OPTO 22 Programmable logic controller. We offer units to comply the GMP guidelines and to meet FDA and other regulatory agency requirements. SIPand CIP units available.
Condenser Capacity: 20 to 800 Kg
SALIENT FEATURES:
Automated cycles for:
- 8 steps of drying and 16 steps of primary drying, one secondary and one final.
- Defrost by warm water/hot gas/steam.
- Sterilisation an units designed with steam in place.
- System testing for performance evaluation of the freeze drying cycle.
- Leak rate testing of the entire vacuum sytem.
- Clean in place when that option is installed.
| Shelf | |
| Area | 3 to 320 sq. ft./ 0.3 to 30 sq. m |
| Type | Bulk / Hydraulic stoppering |
| Clearance | 3 to 5 in to 125 mm |
| Temperature | Below -60 to 70°C |
| Condenser | |
| Type | Internal or External |
| Design | Plate or Coil |
| Capacity | 12 to 800 Kg |
| Temperature | Below -75°C |
| Vacuum | |
| Pump | Leybold Two – Stage corrosion resistant |
| Pump down | Less than 20 minutes to 100 Torr |
| Ultimate Vacuum | 5 m Torr |
| Refrigeration | |
| Compressor | Carlyel or Bitser Two – Stage 7.5 to 30 HP (Multiple Systems |
| Cooling | Water |
| Controls | |
| PLC | OPTO22 Snap B 3000 |
| PC | Windows Based with Pentium Processor |
| Interface | Opto 22 Factory Floor or Intellution in Fix |
| Electrical | |
| Volts / Ph/Hz | 200-220-240-380-415-460 V/ 3 Ph / 50-60 Hz |
| Options and Services | |
| Steam – in Place (SIP) | Mirror finishes |
| Clean- in Place (CIP) | Validation Services |
| Hydraulic Stoppering | Maintenance contracts |
| Stainless Steel Bellows | Redundant systems |
| Auto Locking Doors | Clean Room Configuration |
| Cascade Refrigeration Systems | Liquid Nitrogen Traps |
| Dry Vacuum Pump | Extended Warranties |
